What produces the maximum glide range?
What produces the maximum glide range?
Flying at Vmd. At this speed the aircraft is flying at the maximum ratio of Lift and Drag, maximizing the potential energy consumption in terms of distance travelled.
What are the lift qualities of a swept wing?
What are the lift qualities of a swept wing?
Poor, because the sweep-back design has the effect of reducing the lift capabilities of the wing.
What effect does a wet runway have on V1?
What effect does a wet runway have on V1?
V1 is lower when the runway is wet than when the runway is dry, because of the longer ASDR on a wet runway.
How does GPWS work?
How does GPWS work?
GPWS is a central computer system that receives various data inputs on configuration, (radio altimeter) height/altitude and instrument landing system glide slope deviation and is able to alert the pilot when a dangerous situation is about to occur.
What is the range of a VOR?
What is the range of a VOR?
VOR stations are fairly short range: the signals are line of sight between transmitter and receiver and are useful for up to 200 miles.
Each station broadcasts a VHF radio composite signal including the navigation signal, station's identifier and voice, if so equipped.
Why will a jet usually not fly at 41.000 feet?
Why will a jet usually not fly at 41.000 feet?
Because of the distance which has to be covered to reach 41.000 feet which may not be convenient for a short flight.
On long flights it is more typical to fly at 41.000 feet when the aircraft weight and performance allows.
What is anhedral?
What is anhedral?
Downward inclination of a wing from the root to the tip.
If turboprops are more efficient aircraft, why do they not climb that high?
If turboprops are more efficient aircraft, why do they not climb that high?
Jet engines are designed to achieve their best specific fuel consumption at high rpm, which can only be achieved at high altitudes where the air density is low.
Thrust produced will be low enough to equal the required cruising thrust. Also high altitude gives the best operating conditions for the airframe i.e. minimum drag during the cruise.
Turboprops need relatively dense air for the propellers to work efficiently and at high altitude the density would be too low.
How does a jet engine/gas turbine work?
How does a jet engine/gas turbine work?
Forward motion forces air into the intake which is a convergent duct where it is compressed (causing a temperature rise).
Fuel is added and combustion takes place increasing the volume. The expanding gasses accelerate to the atmosphere through the exhaust duct nozzle producing a propulsive jet.
What does the abbreviation MSA mean?
What does the abbreviation MSA mean?
Minimum Safe Altitude.